Equipment Catalog
FPSO — Floating Production Storage & Offloading
World-class Floating Production, Storage, and Offloading (FPSO) vessel with 200,000 barrels per day oil processing capacity and 100,000 DWT cargo storage. The FPSO is permanently moored via a turret mooring system, allowing the vessel to weathervane freely through 360° in all sea states. Topside processing facilities include a 3-train oil/water/gas separation plant, gas compression and injection system, produced water treatment to IMO MARPOL standards, and an offloading system capable of tandem transfer to shuttle tankers at 10,000 m³/hr. Power generation is provided by four 20MW dual-fuel generators using produced gas. Living quarters accommodate 200 personnel. The vessel is classed by Bureau Veritas, holds DP3 dynamic positioning capability on the turret integrated mooring system, and is fully certified for harsh environment deepwater operations to 2,000m. Comes with full offshore crew complement and asset management contract. Maintenance reserve fund in place. Available on field life-of-project basis.
Petroleum Tanker Truck — 45,000L
Heavy-duty petroleum tanker truck built on a 6x4 prime mover chassis, paired with a tri-axle aluminum tank trailer with a 45,000-litre capacity. This unit is ADR/DGR certified for the transport of flammable liquids including diesel, petrol, aviation fuel, and light crude oil. The elliptical aluminum tank is divided into 5 separate compartments allowing multi-product loads without cross-contamination. Safety features include emergency shut-off valves, overfill protection sensors, earthing cables, fire extinguishers, and full hazmat placarding. The truck is equipped with GPS fleet tracking, a digital tachograph, and anti-lock brakes. Payload capacity of 30 tonnes. Engine overhauled at 200,000 km. Current road worthiness certificate and carrier permit. Crew training available on request.
Semi-Submersible Offshore Drilling Rig
Ultra-deepwater semi-submersible drilling rig rated to 3,000 metres water depth and 9,000 metres measured depth. This 6th-generation rig is equipped with a top drive drilling system, 2,000-ton hook load capacity, and a fully automated pipe handling system capable of running 5,400 metres of riser string. The rig operates on dynamic positioning (DP3) with triple redundancy for maximum uptime in extreme weather conditions. Living quarters accommodate 120 personnel with full amenities. Onboard facilities include a 120m² drill floor, mud logging unit, blow-out preventer stack rated to 15,000 PSI, and a certified helideck for S-92/AW139 operations. All equipment maintained under a Class-approved preventive maintenance system. DNV class certificates current. Available on day-rate or turnkey basis.
VLCC Crude Oil Tanker Ship
Our Very Large Crude Carrier (VLCC) is a state-of-the-art ocean-going oil tanker capable of transporting up to 300,000 tonnes of crude oil across intercontinental routes. Built to the highest DNV class standards, this vessel features double-hull construction for maximum environmental protection, advanced navigation systems including ECDIS and AIS, and full inert gas systems for cargo safety. Equipped with 28 cargo tanks and 2 slop tanks, the vessel handles multiple grades of crude oil simultaneously. Her 21-knot service speed and 30,000nm range make her ideal for VLCC trades between Middle East Gulf, West Africa, and Asia Pacific terminals. Comes with a full crew complement of 32 officers and ratings, all STCW-certified and experienced on VLCC operations. All classification certificates current. Available for time-charter or voyage-charter arrangements.
3-Phase Gas-Oil Separator — 15,000 BPD
Horizontal three-phase gas-oil-water separator vessel rated at 15,000 barrels per day liquid throughput. Designed to API 12J and ASME Section VIII Division 1 code, the vessel operates at 600 PSI working pressure and 120°C design temperature, suitable for sour service (NACE MR0175) with H₂S up to 500 ppm. Internal configuration includes a primary inlet cyclone diverter, secondary gravity settling compartment, weir with adjustable liquid level controllers, and a demister mist eliminator pad. Instrumentation includes pressure safety valves, level gauges, temperature transmitters, and control valves all linked to a local control panel with 4–20mA HART outputs. The separator package is fully skidded on a structural steel base with access platforms, handrails, and ladders. Utility connections include fuel gas, instrument air, drain, and vent. Full dimensional datasheet and PFD/P&ID available. Delivery within 6 weeks from Oman yard.
Beam Pump Jack — Automated Oil Well
Heavy-duty beam pump jack (sucker rod pump) designed for artificial lift operations on conventional oil wells producing 15–20 barrels per day from depths up to 300 metres. The unit features a 456-inch pumping unit with a 120-inch stroke and a 44,000 ft-lb peak torque gearbox, manufactured by Lufkin Industries. The motor is a 30kW IE3 premium efficiency model with integrated VFD for optimised pump fillage and energy savings. The automated control system monitors downhole pump performance via dynamometer cards, automatically adjusting pump stroke speed to maximise production while preventing pump-off. Remote monitoring via 4G telemetry allows well surveillance from the field office. Complete with sucker rod string, plunger pump assembly, stuffing box, and production header. Suitable for crude oil, water-cut wells, and coal-bed methane operations. Trailer-mounted for quick relocation.
Christmas Tree Wellhead Assembly — 5,000 PSI
API 6A compliant wellhead and Christmas tree assembly rated to 5,000 PSI working pressure with a 4-1/16 inch bore. Manufactured from 60K yield strength carbon steel with Inconel-clad bore and sealing faces for H₂S service (NACE MR0175). The assembly includes a casing spool, tubing head spool, master gate valve, swab valve, two wing valves, and choke manifold — all hydraulically actuated for remote operation from the surface control panel. The tree is rated for 121°C (250°F) maximum operating temperature and H₂S partial pressure up to 340 kPa (PR1 service). All valves are API 6D full-bore ball valves with fire-safe design. The hydraulic control unit (HCU) provides fail-safe closure on loss of hydraulic pressure. Pressure test certificates and material test reports (MTRs) provided. Suitable for vertical, deviated, and horizontal onshore wells. Installation crew and pressure testing equipment available.
Crude Oil Storage Tank Farm — 500,000 BBL
Fully operational crude oil tank farm comprising three fixed-roof atmospheric storage tanks with a combined capacity of 500,000 barrels. Each tank is constructed to API 650 standard using high-tensile carbon steel with full epoxy internal lining for corrosion protection. The facility is equipped with secondary containment bunds rated at 110% tank volume, automatic overfill protection, level gauging, and continuous leak detection systems. All tanks are connected via a dedicated manifold system with ball valve isolation, allowing flexible blending and segregation of crude grades. The facility includes two centrifugal pump sets at 2,000 m³/h throughput each, custody transfer metering to OIML R117 standard, and a full SCADA system for remote monitoring. API 653 inspection current. Located adjacent to deepwater marine terminal with pipeline connectivity to three major refineries.
Gas Compressor Station — 50 MMSCFD
Skid-mounted natural gas compressor station comprising three centrifugal compressor trains, each driven by a Solar Turbines Saturn 20 gas turbine (1,200kW), delivering a combined throughput of 50 million standard cubic feet per day (MMSCFD) at 3,600 PSI discharge pressure. The station is designed for gas gathering, transmission, and reinjection applications. Each train is equipped with inlet separation, inter-stage cooling, lube oil system, dry gas seals, and anti-surge control. The station control system is fully automated with Siemens S7 PLC, remote SCADA interface, and emergency shutdown (ESD) logic compliant with IEC 61511. The entire facility is housed within a weather-proof acoustic enclosure meeting ISO 15664 noise requirements. Fully skidded and modular for rapid site installation within 4 weeks. Current API 670/671 compliance certificates available.
